Welcome,
Shamu Advanced Material
Service line
86 0532-66739676
Protective Polyurea
The Best Performance, The Best Service

Qtech-412 Coastal Dam Polyurea Protective Material


 

Qtech-412 Coastal Dam Polyurea Protective Material

PRODUCTION INFORMATION
 
Production Description
Qtech-412 Coastal Dam Polyurea Protective Material is independently developed by Qingdao Shamu International Trade Co., Ltd. It is the state of the art 100% solids, ultra fast cure, flexible, spray-applied, high build, and two components aromatic pure polyurea elastomer. The system consists of A component, a quasi-prepolymer rich of free NCO, and B component, a mixture of polyetheramines, amine extenders and other additives. Qtech-412 is used by itself or in combination with other materials to produce dam protective coatings, anti collision liners, reinforcing layer, and resilient surface on concrete, stone and other substrates. Qtech-412 can produce an extremely tough film at all thicknesses; it may be applied in all positions and to any suitably prepared substrate. Qtech-412 can effectively decrease the impact of tidewater to dam, improve the imperviousness, prevent floods and debris flow damage and improve the safety and durability of dams.
 
Advantages
1. Anti- collision, Impact resistance, Impermeable, Abrasion resistant.
2. Bondable and paintable to various kinds of substrates.
3. Fast cure, short down time, no sagging.
4. Excellent Physiochemical Properties.
5. Ambient insensitive, good thermal stability.
6. 100% Solids, No VOC’s, Odorless, No Toxic Vapors.
7. Good resistance to a wide range of chemical attack.
8. Good weather ability, Added color stability.
9. Wide service temperature (-45~150 ºC).
10. Seamless, flexible, slick and non-porous.
11. No chalking and fading in long-term use outdoors.
 
Recommended Uses
Qtech-412 Coastal Dam Polyurea Protective Material is an ultra fast cure system; it can be applied at thicknesses of several ten millimeters, or greater, in a single application. It can be widely used in Coastal dam, Buttress dam, Overflow dam, Flood-discharge tunnel, Desilting tunnel, Water diversion canal, Flood embankment and Flood discharge facility coordination.
 

 
Physical Properties

Tensile Strength/ MPa

25

Elongation/%

415

Tear Strength/( N/mm)

80

Shore Hardness

A-88

Abrasion Resistance /(GB/T 1689-1998, cm3/1.61km, mg)

0.45

Friction Coefficient

0.85~0.96

Adhesion /(Pull off, MPa)

≥3.5

Density/( g/cm3)

0.95~1.05

 
Product Characteristics

Solids/%

100

VOC (calculated)

0

Gel Time/s

14

Tack Free/s

20~30

Shelf Life

6 months, unopened at 15~40 ºC

Flash Point/ ºC

>100

Mix Ratio V/V

1: 1

Recommended Spreading Thickness/mm

2~3

Colors

Optional

 
Drying time is temperature, humidity, and film thickness dependent.
 
Chemical Resistance
Consult our technicist and chemical test date for corrosive environment applications.
 
Installation
Consult our application information and recommended method statements.
 
Packaging
•  Part A: 220 kilogram per drums.
•  Part B: 200 kilogram per drums.
Custom package available at additional charge.
 
Notes
1. Qtech product is intended for industrial use by properly trained professional applicators only.
2. Thoroughly mix container of B component with an air-driven power mixer for a minimum of 15 minutes prior to application.
3. Adding a nitrogen blanket is strongly recommended for use on the "A" component for storage after opening.
4. It is a 100% solids production, strictly prohibit add any diluents.
5. The quality and fitness of the product is depending upon the proper mixture and application of the component by the applicator.
6. This specification is an accumulation of long term testing and experience. Published technical data and instructions are subject to change without notice.
7.  For more information please consult the Qingdao Shamu International Trade Co., Ltd. or visit our website www.shamu-intl.com or www.polyurea.cn.
 
Technical Data Sheets
    • Qtech-412 Coastal Dam Polyurea Protective Material  [2011-05-06]
 
APPLICATION INFORMATION
    • APPLICATION INFORMATION  [2011-05-06]
 
CHEMICAL TEST DATE
    • CHEMICAL TEST DATE  [2011-05-06]