Welcome,
Shamu Advanced Material
Service line
86 0532-66739676
Polyurea Supporting Product
THE BEST PERFORMANCE, THE BEST SERVICE

Qtech-113 Polyurea Recoat Plyadhesive


 

 

 

Qtech-113 Polyurea Recoat Plyadhesive

PRODUCTION INFORMATION
 
Production Description
Qtech-113 Polyurea plyadhesive is independently developed by Qingdao Shamu International Trade Co., Ltd. and it is a china patent technology (No: 200910020530.1). It is low solvent, ambient moisture and temperature insensitive, structural non-sag plyadhesive material. The system consists of two components A (resin) and B (curing agent). It is formulated to apply in pre-polyurea and recoating polyurea or other coatings, liners and so on. Qtech-113 provides the high adhesion prior to recoat polyurea to polyurea or other coatings. Qtech-113 is polyurethane based two component, high solids, liquid applied recoated plyadhesive material with unique adhesion characteristics.
 
Advantages
1.  Fast cure, short down time.
2.  High modulus, high strength, structural gel adhesive.
3.  Non-sag gel for vertical and overhead applications.
4.  Creamy viscous consistency for easy recoating of pre-coatings.
5.  Excellent adhesion to most difficult surface.
6.  Easy 2:1 mix ratio(A:B) and consult us.
7.  Application at a wide of temperature range.
8.  Remains flexible in wide range of temperatures.
9.  Chemical attack resistance.
 
Recommended Uses
•  Recoat polyurea to pre polyurea such as Qtech serial products.
•  Recoat polyurea to pre coatings.
•  Adhesive for metal, wood, polyurethane form, plastic and so on.
 
 
 
 
Physical Properties

Appearance: A component
            B component

Transparent yellow liquid
Pale yellow liquid

Solids: A component/ %
            B component/%

≥80
≥80

Consistency

0(no flow)

Tack free time/(25℃,RH=60%, min)

≤10

Curing time/(25℃, RH=60%, min)

≤60

Interlaminar peeling Strength
(Recoat time, 6~8hours, N/mm)

≥6 or Coating Failure

Mix Ratio/(A:B)

2:1(consult)

Viscosity/ (25 ºC, cps)

600

Shelf life /(25 ºC, months)

12

 
(The above properties and values are highly dependent on temperature, equipment, and related parameters and slight are possible)
 
 
ORDERING INFORMATION
 
Packaging
•  Part A: 25kilogram per drums.
•  Part B: 25 kilogram per drums.
(Custom package available at additional charge).
 
Freight Classification
Coating Solution Non-Flammable Liquid .
 
 
APPLICATION INFORMATION
 
Surface Preparation
Profile the pre polyurea or other coatings surface, the surface must be clean and sound. It may be free of standing water. Remove dust, laitance, grease, curing compounds, and other bond inhibiting contaminants.
 
Mixing
Pre-mix each component thoroughly. Place 2 part by volume of component A and 1 part by volume of component B into a clean pail. Mix thoroughly for 3 minutes with low speed drill using agitator’s mixer until uniformly blended.
 
Applications Methods
After shot blasting to expose all bug holes, apply the first primer to bond substrates and putty. Work into the bug holes and scrape off excess material, applying the repaired putty to filling bug holes, pinholes and defects. Surface should be strike off level, and then apply the second primer. Allow Qtech-112 to become dry to the touch prior coating with Qtech serial polyurea system.
 
Application Conditions
       Temperature:
           Air and surface: -20°C ~100 °C
       No standing water on working surface
       Materials must be preheated to 15°C prior to use.
 
Storage
1.   Store drums and pails in a cold, dry and ventilated location between 15°C and 40°C.
2.   Six months in sealed unopened containers.
3.   Keep away from fire and heat source.
4.   Keep away from rain and sun.
 
Safety
Read and understand the MSDS provided with all shipments. Always use products with adequate ventilation and use required PPE. For confined space use fresh air supply. For open air, use half face, twin cartridge respirators approved. Always protect eyes and skin. Strictly adhere to industry safety standards.
 
Disposal
Dispose of in accordance with local and international disposal regulation.
Notes
1.  Reading and understand the production information.
2.  This product is intended for industrial use by properly trained professional applicators only.
3.  Adding a nitrogen blanket is strongly recommended for use on the “A” component for storage after opening.
4.  The quality and fitness of the product is depending upon the proper mixture and application of the component by the applicator.
5.  This specification is an accumulation of long term testing and experience. Published technical data and instructions are subject to change without notice.
6.  For more information please consult the Qingdao Shamu International Trade Co., Ltd. or visit our website www.shamu-intl.com or www.polyurea.cn.
 

Technical Data Sheets

 •  Qtech-113 Polyurea Recoat Plyadhesive  [2011-05-06]